2-channel passenger counting
The body lists two counting channels with real-time CMS synchronization.
PC26 · AI passenger counting PC26 combines two-channel passenger counting, multi-channel video and driver monitoring in one connected fleet recorder. The current record lists four-channel video, one DMS channel, 4G or Wi-Fi and GPS/BeiDou positioning. Buyer overview The body lists two counting channels with real-time CMS synchronization. The title and body list four-channel monitoring, but the detailed camera-allocation line requires confirmation. The body lists one DMS channel; camera, license and calibration scope should be confirmed. 4G or Wi-Fi, positioning and APP/Web access are listed for remote operations. System fit Map each counting and camera channel to the real vehicle, then document network, positioning, storage, platform and reporting responsibilities. Confirm door width, mounting height, passenger direction, peak crowding, lighting and expected output. Confirm power, interfaces, antennas, connectivity, CMS access, storage and commissioning scope. Current structured record Use structured data as the current baseline. Conflicts with older body copy are disclosed below and require confirmation. Preserved from the original page Commissioning planning Run repeatable boarding and alighting tests across normal and difficult conditions. Agree how exceptions, connectivity loss and manual reconciliation will be handled. Map Connect Test Example applications Map one counting channel to each doorway and validate simultaneous passenger movement. Combine passenger totals, driver alerts, location and video review under defined operating rules. Connect validated counts to route, utilization and service-planning workflows. The source lists an error rate below 2% without a test protocol. Validate performance for door geometry, mounting, lighting, passenger direction, crowding and occlusion. The four-channel video headline conflicts with a body line describing two counting channels plus two camera-recording channels. Structured storage is 512GB SD while the body adds a 2TB hard disk. Structured positioning says GPS/BeiDou while the technical body says GPS only. DMS is an assistance feature and does not replace driver attention or fleet safety procedures. Buyer questions The body lists two passenger-counting channels. The title and body say four-channel video, but the detailed allocation line mentions two camera-recording channels. Confirm the supplied configuration. The body lists one DMS channel. Confirm the camera, license, alert logic and calibration scope. Structured data lists 512GB SD; the body also mentions a 2TB hard disk. Confirm the selected option. No test method is supplied. Run acceptance testing at every intended doorway and operating condition. Define lawful purpose, notice, access, retention and cybersecurity for passenger, driver, video and location data. Confirm the complete project AlwayCare can review channel allocation, mounting, connectivity, CMS integration and acceptance-test requirements.What is PC26?

Four points to evaluate first
2-channel passenger counting
4-channel video headline
Driver monitoring
Connected fleet workflow

Define channels, doors and data workflow
Counting decision
Integration decision
Technical specifications
Video output VGA Satellite positioning GPS and BeiDou dual mode Optional interface I/O or RS232 Wireless communication 4G or Wi-Fi Storage 512GB SD card Video encoding H.264 / H.265 Operating temperature -20°C to 70°C Warranty 15 months Existing product and deployment views


Validate counts in the real vehicle
Doors, channels and mounting
Power, network and CMS
Flow, lighting and crowdingWhere PC26 may fit
Two-door transit buses
School and shuttle fleets
Fleet reporting projects
Performance, safety and data boundary
PC26 FAQ
How many passenger-counting channels are listed?
Does PC26 provide four video channels?
Is DMS included?
What storage is listed?
Is below-2% error guaranteed?
What data controls are needed?
Share your vehicle, doors and reporting workflow